SSR-S40VA VR to AC 40A 280VAC Single Phase Solid State Relay
SSR-S40VA
SHINING E&E has 40 years of experience in offering customers VR to AC 40A 280VAC Single Phase Solid State Relay, and ensuring to meet each customer's requirements.
SSR, SS Relay, SSR Relay, Single Phase SSR, 40A SSR
SSR perform the same job as Mechanical Relays, but have the following advantages:
1. SSR produce less electromagnetic interference than mechanical relays during operation. This is mostly due to the absence of a phenomenon called contact arcing only present in mechanical relays, where the physical contacts of the relay tend to spark internally while switching. The reduced interference can also be attributed to the fact that SSRs do not use electromagnets to switch.
2. The switch contacts of a mechanical relay will eventually wear down from arcing. An SSR will have a longer life because its internals are purely digital. Properly used, they will last for millions of cycles.
3. SSR turn on and off faster than mechanical relays (≈1ms compared to ≈10ms).
4. SSR are less susceptible to physical vibrations than mechanical relays.
5. Since the switch inside an SSR isn't a mechanical switch, it does not suffer from contact bounce and operates silently.
| SSR-S40VA VR to AC 40A 280VAC Single Phase Solid State Relay |
| Gerneral Product Information | |
| Item number: | SSR-S40VA |
| Max. Load Current: | 40A |
| Input Operating Voltage: | 250 KΩ@ 110 V (Potentiometer: RV-001A) 500 KΩ@ 220 V (Potentiometer: RV-002A) |
| Output Load Voltage Range: | 24~280 VAC |
| Dimension: | 57.0 x 42.0 x 24.0 mm (L x W x H) |
| Spec | ||||
| Item No. | Load Current | Input Voltage (Control) | Output Voltage | Control Method |
| SSR-S10VA | 10A | 250 KΩ@ 110 V 500 KΩ@ 220 V |
| Phase (Angle) Control |
| SSR-S25VA | 25A | |||
| SSR-S40VA | 40A | |||
| SSR-S10VA-H | 10A | 500 KΩ@ 220 V 1000 KΩ@ 380 V | 90~480 VAC | |
| SSR-S25VA-H | 25A | |||
| SSR-S40VA-H | 40A | |||
| Product Photos |
| Product Features |
Part Number: SSR-S40VA Load Current: 40A Input (Control) Voltage: 250 KΩ@ 110 V (Potentiometer: RV-001A) / 500 KΩ@ 220 V (Potentiometer: RV-002A) Output Voltage: 24~280VAC Optional Part: Proteceive Cover (SSR-S-CV) / Heat Sink (HS-60050 / HS-60100 / HS-60150 / HS-60200) / Potentiometer (RV-001A / RV-002A) ．Shorter switch time than electromechanical relay's. ．Longer Lifetime, as there are no switching contacts that will physically wear out. ．High-speed & high-frequency switching operations. ．It generates little noise comparing to mechanical relays. ．No spark is generated during switching. ．Phase (Angle) Control control methods. ．LED input status indicator. |
 |  |  |  |
| Item No. | SSR-S10VA | SSR-S25VA | SSR-S40VA |
| Specifications/Dimensions | |||
| L x W x H | 57 x 42 x 24 mm | ||
| Ref. L1 x W1 | 43.8 x 27.0 mm | ||
| Ref. L2 x W2 | 46.3 x 12.0 mm | ||
| Ref. Diameter (Ø) | 5 mm | ||
| Electrical Specifications | |||
| Max. Load Current | 10A | 25A | 40A |
| Control Method | Phase Control | ||
| Input Operating Voltage | 250 KΩ@ 110 V, 500 KΩ@ 220 V | ||
| Input Current | N/A | ||
| Must Turn Off Voltage | N/A | ||
| Output Load Voltage Range | 24~280 VAC | ||
| Max. One Circle Peak Surge | 120A | 250A | 400A |
| Min. Blocking Voltage | 600V | ||
| Turn On & Turn off Time | <1/2 AC circle | ||
| Isolate Impedance | 50 MΩ / 500 VDC | ||
| Max. On-State Voltage Drop | 1.6 V / 25℃ | ||
| Materials | |||
| Body Materials | PBT | ||
| Color | White | ||
| Accessories & Parts | |||
| Protective Cover | SSR-S-CV (Optional) | ||
| Heat Sink | HS-60XXX series (HS-60050, HS-60100, HS-60150, HS-60200) | ||
| Approval & Certificate | CE | ||
|  |  |  |
| Item No. | SSR-S10VA-H | SSR-S25VA-H | SSR-S40VA-H |
| Specifications/Dimensions | |||
| L x W x H | 57 x 42 x 24 mm | ||
| Ref. L1 x W1 | 43.8 x 27.0 mm | ||
| Ref. L2 x W2 | 46.3 x 12.0 mm | ||
| Ref. Diameter (Ø) | 5 mm | ||
| Electrical Specifications | |||
| Max. Load Current | 10A | 25A | 40A |
| Control Method | Phase Control | ||
| Input Operating Voltage | 500 KΩ@ 220 V, 1000 KΩ@ 380 V | ||
| Input Current | N/A | ||
| Must Turn Off Voltage | N/A | ||
| Output Load Voltage Range | 90~480 VAC | ||
| Max. One Circle Peak Surge | 120A | 250A | 400A |
| Min. Blocking Voltage | 600V | ||
| Turn On & Turn off Time | <1/2 AC circle | ||
| Isolate Impedance | 50 MΩ / 500 VDC | ||
| Max. On-State Voltage Drop | 1.6 V / 25℃ | ||
| Materials | |||
| Body Materials | PBT | ||
| Color | White | ||
| Accessories & Parts | |||
| Protective Cover | SSR-S-CV (Optional) | ||
| Heat Sink | HS-60XXX series (HS-60050, HS-60100, HS-60150, HS-60200) | ||
| Approval & Certificate | CE | ||
| Packaging |
| 100pcs/ctn, N.W. :11.6kgs /carton |
| Shipping information |
| 1. For small quantity, shipment is prefered to shipping with express by UPS, DHL, EMS, TNT or FedEx to meet your deadline on time worldwide basis. |
2. For regular mass production, shipments can be arranged by air-shipping, sea-shipping or express. Let us know on your requirement we will try to save your budget and meet deadline. |
