Menu
- Home
- Company
-
Products
-
Terminal Blocks
- Din Rail Mounted Terminal Blocks
- Panel Mounted Terminal Blocks
- High Temperature Ceramic Terminal Blocks (Porcelain Connectors)
- Double Layers (Decks) Terminal Blocks
- Double Row Barrier Terminal Strips
- PCB Type Single Row Barrier Terminal Blocks
- Power Terminal Blocks
- Power Splicer Terminal Blocks
- Power Stud Terminal Blocks
- Power Splicer Stud Terminal Blocks
- Power Distribution Terminal Blocks
- Euro Type Feed Through Terminal Blocks
- Fuse Holder / Fuse Block
- Fuse Clips
- Tube Fuse
- Solid State Relay
- Insulators & Busbar Support
- Accessories
- Terminal Jumper & Barrier Jumper
- Terminal Block Quick Connector
- Buckle Clamp Strap
- Filter Specification(Terminal Blocks|Solid State Relay|Fuse Holder|Insulators)
-
Terminal Blocks
- News
- FAQ
- Contact Us
- OEM/ODM
Promotion
Fixed Terminal Block
TB Series Terminal Block is Panel Mounted Terminal Block, the spec is 600V, 15A / 25A / 35A with 3 / 4 / 6 / 12 Pole.
MoreCeramic Terminal Block
Ceramic Terminal Blocks are designed for wiring connection in high temperature condition. Spec: 15A / 20A / 50A / 65A.
MoreDIN Rail Terminal Blocks - what is the difference betweens SHINING products TE and TA connector? | TERMINAL BLOCKS' SOLUTION
Based in Taiwan since 1978, SHINING E&E INDUSTRIAL CO., LTD has been a manufacturer of electrical terminal blocks and barrier strip connectors manufacturer. Since 1978, in the Power Distribution Industry, Shining E&E has been offering our customers high quality production service. With both advanced technology and 45 years experience, Shining E&E always make sure to meet each customer's demand.
DIN Rail Terminal Blocks - what is the difference betweens SHINING products TE and TA connector?
With 40 years of experience, DIN rail terminal blocks have become Shining's popular product. We heard your voice that you might be interested in these.
Here to answer for you the difference between these two DIN Rail Terminal Block
Although the rail could become more troublesome to install, the purpose of using rails is to increase the installation space.
However, If you would like to install a terminal block on the panel, the TA series is a good choice. TA series terminal block can be installed on the panel via "Mounting Lug" and be fastened via Screw. The "Mounting Lug" are on both sides of the terminal block
Product | TA | TE |
---|---|---|
Installation | panel, rail (35mm) | rail(35mm) |
Current (A) | 10, 20, 30, 40, 60, 100, 150, 200, 300, 400 | 10, 20, 30, 40, 60,80, 100,125,150, 200, 300, 400 |
End Plate | With Mounting Lug | Without Mounting Lug, two pcs per set |
Number of End Plate c | 1 | 2 |
transparent cover | all | all |
Snap-on spring for din rail | None | including 60A and above |
How much-rated currents do SHINING DIN Rail Terminal Block have?
TA: 10A/ 20A/ 30A/ 40A/ 60A/ 100A/ 150A/ 200A/ 300A/ 400A
TE: 10A/ 20A/ 30A/ 40A/ 60A/ 80A/ 100A/ 125A/ 150A/ 200A/ 300A/ 400A
The physical appearance differences between the DIN Rail Terminal Blocks
TE Series. Rated Current: Higher than 60A | TE Series. Rated Current: lower than 60A |
---|---|
Let's start with TE: we're going to use 60A as a line.
You can see the differences in TE's physical appearance below and above 60A. When TE exceeds 60A, it has a side cover, just like TA. Their top is smooth and without a gap, but there is a gap in the middle of the TE terminal blocks if the current is less than 60A.
The DIN Rail Terminal Block attachments:
Let's start with TE: we're going to use 60A as a line.
You can see the differences in TE's physical appearance below and above 60A. When TE exceeds 60A, it has a side cover, just like TA. Their top is smooth and without a gap, but there is a gap in the middle of the TE terminal blocks if the current is less than 60A.
SHINING DIN Rail Terminal Block attachments:
TA/TE Series. Rated Current: Higher than 60A | TA/TE Series. Rated Current: Lower than 60A |
---|---|
Transparent Cover: soft material
Protective Cover: Hard material
TA full range: we can use both types of lids
TE series: 10A/ 20A/ 30A/ 40A can only use protective cover. Both lids above 60A can be used